Anchor Link
Search Links
 
 
 
 
About Us
Contact Us
FAQs
Products
Case Options
Services
Sitemap
 

Table of Contents 

  1. What color are cases stocked in?
  2. Is there a minimum for stock case order?
  3. What is the lead-time for a stock case?
  4. What is the minimum order quantity for a case run in color?
  5. What material are the cases made of?
  6. What is the temperature range for the cases?
  7. Are the cases waterproof?
  8. What types of foam do you offer?
  9. Can cases be made in a clear material?
  10. What type of hinge is on the case?

What color are cases stocked in?

All cases shown on the stock case list are inventoried in black.

Back to Top

Is there a minimum for stock case order?

Stock cases, in black, can be ordered in any quantity from 1 to 500. Orders of stock cases larger than 500 pieces are generally run to order and will require additional time. Orders for stock cases in colors other than black would need to meet the minimum order quantities and would require production lead time.

Back to Top

What is the lead-time for a stock case?

Stock cases in black are inventoried in our Massillon, Ohio warehouse for shipment within 48 hours of order confirmation. Production lead time for large quantities or cases in colors other than black is typically 2-4 weeks from order confirmation.

Back to Top

What is the minimum order quantity for a case run in color?

Orders for stock cases in standard PFC colors would need to meet the minimum quantity for a modified case of comparable size. In general cases 13˝” wide and under would require a minimum order of 500 pieces. Cases 15” to 19” wide would require minimum orders of 350 pieces and cases with a width dimension wider than 20” have a 250 piece minimum. These quantities are guidelines only. Please consult our Customer Service staff for minimum quantities on the specific case you need.

Back to Top

What material are the cases made of?

PFC cases are made of HDPE (High Density Polyethylene). HDPE provides a good mix of abrasion resistance, impact toughness, resistance to chemicals and strength for a general purpose carrying case. Latches are made of a proprietary blend of Polyolefins specially formulated to give high flexibility and fatigue resistance over an extended temperature range.

Back to Top

What is the temperature range for the cases?

HDPE has a working temperature range of -30°F to 150°F. PFC latches are tested over this same temperature range for stretch and fatigue resistance and their ability to withstand shock.

Back to Top
  		 

Are the cases waterproof?

PFC cases are water resistant but not waterproof. All PFC cases are designed with a closefitting interlock which provides a water and dust trap but does not seal the case interior.

Back to Top

What types of foam do you offer?

We stock 2# Charcoal Ether foam and 1.7# Dark Grey Laminated Polyethylene foam in a variety of thicknesses. We can supply a variety of Ether, Urethane or Poly foams at your request.

Back to Top

Can cases be made in a clear material?

No, they can not. Virgin (uncolored) HDPE is a translucent material when formed. All PFC cases have a surface texture which improves scratch resistance which would impede the ability to “see through” the case walls.

Back to Top

What type of hinge is on the case?

All PFC cases incorporate a patented mechanical pin and socket hinge. Originally developed in 1972 our hinge has undergone constant improvement and has been licensed to over 30 other companies world wide. Both the pins and sockets are formed during the molding operation to insure maximum strength and longevity.

Back to Top
 
 
  
 
Home | Contact | About Us | FAQs
The Plastic Forming Co., Inc. | 20 South Bradley Road | Woodbridge, CT 06525-2330
Phone: (203) 397-1338
Copyright © 2006. The Plastic Forming Co., Inc.. All rights reserved.